Zahara printing plate technology has taken waterless printing to a new level of performance and compelling business advantages:
- Plates that meet your precise printing needs: Verico’s advanced coatings enable us to create Zahara plates that are precisely tailored to your print requirements.
- Chemistry-free plate setup: Zahara technology completes the eco-friendly picture with chemistry-free plate setup. This eliminates the cost, storage, health risks, and residual chemical transfer associated with chemistry-based preparation. In addition, chemistry-free simplifies your workflow, contributing to profitability.
- Consistently high-quality printing: Zahara allows a reproduction of extremely sharp prints with the finest screenings and highest resolutions.
- Longer runs with each plate: Zahara plates aren’t degraded by chemical washing during setup, which gives them superior durability. The silicone layer stays extremely stable and you get more runs from each plate, saving on investment costs and keeping your presses rolling.
- Superior ability: During the chemistry-free plate making process, you have fewer variables for errors.
- Environmental and regulatory compliance: Zahara enables printers to meet increasingly stringent regulatory requirements, including eliminating chemicals, reducing waste, using low-migration inks for food safety, and more.
Verico has a 125,000 square foot (12,000m2) manufacturing space in the company’s U.S. headquarters in Enfield, Connecticut.
Our current company and production plant was previously known as Presstek, which has been in the graphic industry for more than 25years, producing high end quality plates for waterless and wet offset applications. We also have a dedicated 800-square meter warehouse in Europe to help ensure that you have as much safety stock as you need in local inventory.
Zahara® Newz Elite plates are the only chemistry free plates for newspaper printers with superior reading contrast without the use of coloring agents. The chemistry-free plate setup completes the picture of eco-friendly waterless printing and improves profitability and safety virtually overnight.
For the first time, KBA Cortina presses have a second source for waterless plates. Zahara Elite Newz waterless plates are fully compatible with your existing workflow. No press adjustments needed.
• The only chemistry free plate with superior reading contrast without the use of coloring agents.
• Chemistry-free plate setup completes the picture of eco-friendly waterless printing and improves profitability and safety virtually overnight.
• High-end coating technology always provides the finest screening and a sharp dot on every substrate.
• More durable plates and a chemistry-free process enable longer runs per plate to lower your operating costs.
Verico has a 125,000 square foot (12,000m2) manufacturing space in the company’s U.S. headquarters in Enfield, Connecticut. The production capacity in Enfield exceeds the current Cortina market consumption of waterless plates by threefold. Which means Verico can easily meet your second source requirements.
We also have a dedicated 800-square meter warehouse in Europe to help ensure that you have as much safety stock as you need in local inventory.
Verico’s high-end coating technology always provides the finest screening and a sharp dot on every substrate. Our plates deliver high resolution and reach up to 200 lines per inch.
In production, we cut the plate aluminum in line. This gives each plate the same precise, smooth edge and avoids damage to expensive rollers and blanket material. With our stringent Quality Control processes, you can be confident that every plate will provide the same flawless performance.
Zahara plates are known for their durability; the silicone layer stays extremely stable and you get more runs from each plate. Beyond that, Cortina printing demands top performance under harsh conditions. The Zahara Elite Newz plate applies a precise silicone layer for added durability. The result is the most durable waterless plate for Cortina presses with the high resolution you require.
Zahara takes waterless printing one step further: eliminating chemicals for pre-press preparation. Chemistry-free means lower costs and higher worker safety. Eliminating chemical prep also simplifies your workflow, making each job more efficient.
The Zahara Elite NWL plate is the first and only waterless and chemistry-free printing plate for waterless narrow web label presses. It has been designed specifically for label print processes on various substrates and the use of UV-based ink types. The Zahara Elite NWL plate simplifies your platemaking by replacing processing chemistry with water.
The Zahara Elite NWL plate is the first and only waterless and chemistry-free printing plate for waterless narrow web label presses. It has been designed specifically for label print processes on various substrates and the use of UV-based ink types.
The Zahara Elite NWL plate simplifies your platemaking by replacing processing chemistry with water. In a short period of time, Zahara plates have changed the economics of narrow web label printing:
• Save time and money and extend the life of your processor.
• More durable plates and a chemistry-free process enable longer runs per plate to lower your operating costs.
• Higher solvent and scratch resistance.
• Chemistry-free plate setup completes the picture of eco-friendly waterless printing (eliminating dye solutions and chemistry processing). Moving to waterless and chemistry-free with Zahara improves your profitability and worker safety virtually overnight.
• Improve your compliance for food packaging applications, such as eliminating chemical interference with low-migration inks.
Verico’s high-end coating technology always provides the finest screening and a sharp dot on every substrate. Our plates deliver high resolution and reach up to 300 lines per inch or FM20 in stochastic screening mode. In production, we cut the plate aluminum in line. This gives each plate the same precise, smooth edge and avoids damage to expensive rollers and blanket material.
With our stringent Quality Control processes, you can be confident that every plate will provide the same flawless performance.
Zahara plates are known for their durability; the silicone layer stays extremely stable and you get more runs from each plate.
Beyond that, narrow web label printing demands top performance under harsh conditions. The custom Zahara Elite NWL plate applies a precise silicone layer for added durability. The result is the most durable waterless plate for narrow we label printing presses with the high resolution you require.
Verico has a 125,000 square foot (12,000m2) manufacturing space in the company’s U.S. headquarters in Enfield, Connecticut. We also have a dedicated 800-square meter warehouse in Europe to help ensure that you have as much safety stock as you need in local inventory.
Zahara takes waterless printing one step further: eliminating chemicals for pre-press preparation. Chemistry-free means lower costs and higher worker safety. Eliminating chemical prep also simplifies your workflow, making each job more efficient.
In addition to Zahara plates, Verico provides a highly economical washer for waterless setup. Our Eco-Kleen washer incorporates an intelligent filtration system and consumes very little water, which can save thousands of liters of water annually. It’s also extremely compact with a very small footprint. Many of our customers even promote their “low water consumption” printing processes as a competitive differentiator.
Zahara® Elite XP offers waterless printers the most streamlined plate-making solution in the industry. You’ll receive its eco-friendly and production efficiency benefits while delivering uncompromised exceptional print quality to your customers.
The Zahara Elite XP for sheetfed printers is the only high contrast printing plate that is both waterless and chemistry-free a tremendously exciting breakthrough for the industry. Zahara Elite XP is specifically designed for sheetfed presses.
• Chemistry-free plate setup completes the picture of eco-friendly waterless printing and improves profitability and safety virtually overnight.
• Higher solvent and scratch resistance.
• More durable plates enable longer runs per plate to lower your operating costs.
Verico’s high-end coating technology always provides the finest screening and a sharp dot on every substrate. Our plates deliver high resolution and reach up to 300 lines per inch or FM20 in stochastic screening mode. In production, we cut the plate aluminum in line. This gives each plate the same precise, smooth edge and avoids damage to expensive rollers and blanket material. With our stringent Quality Control processes, you can be confident that every plate will provide the same flawless performance.
Zahara plates are known for their durability; the silicone layer stays extremely stable and you get more runs from each plate.
Zahara plates are known for their durability; the silicone layer stays extremely stable and you get more runs from each plate.
Zahara takes waterless printing one step further: eliminating chemicals for pre-press preparation. Chemistry-free means lower costs and higher worker safety. Eliminating chemical prep also simplifies your workflow, making each job more efficient. Chemistry-free prep also means reduced waste. There are no residual chemicals on Zahara plates that can transfer to the press.
Verico has a 125,000 square foot (12,000m2) manufacturing space in the company’s U.S. headquarters in Enfield, Connecticut. We also have a dedicated 800-square meter warehouse in Europe to help ensure that you have as much safety stock as you need in local inventory.
In addition to Zahara plates, Verico provides a highly economical washer for waterless setup. Our Eco-Kleen washer incorporates an intelligent filtration system and consumes very little water, which can save thousands of liters of water annually. It’s also extremely compact with a very small footprint. Many of our customers even promote their “low water consumption” printing processes as a competitive differentiator.
Zahara® ELITE CD-P/M is the leading waterless and chemistry-free plate for printing on optical disks. Verico’s high-end coating technology always provides the finest screening and a sharp dot on every substrate. Our plates deliver high resolution and reach up to 300 lines per inch.
Zahara Elite CD-P/M is the leading waterless and chemistry-free plate for printing on optical disks.
• Zahara waterless printing plates are available with (M version) or without mylar.
• Zahara enables higher ink transfer and higher densities.
• Our production facility can meet the ebb and flow of seasonable demands.
• More durable plates enable longer runs per plate to lower your operating costs.
• There are no residual chemicals on Zahara plates that can transfer to the press.
• The plate can be washed by hand with tap water or using your automatic washers.
Verico’s high-end coating technology always provides the finest screening and a sharp dot on every substrate. Our plates deliver high resolution and reach up to 300 lines per inch or FM20 in stochastic screening mode. In production, we cut the plate aluminum in line. This gives each plate the same precise, smooth edge and avoids damage to expensive rollers and blanket material.
With our stringent Quality Control processes, you can be confident that every plate will provide the same flawless performance.
Zahara plates are known for their durability; the silicone layer stays extremely stable and you get more runs from each plate.
Verico has a 125,000 square foot (12,000m2) manufacturing space in the company’s U.S.
headquarters in Enfield, Connecticut. We also have a dedicated 800-square meter warehouse in Europe to help ensure that you have as much safety stock as you need in local inventory.
The Zahara® Elite K74 is specially designed for use on KBA Karat 74 presses. It is designed to fit perfectly into your existing workflow. No press adjustments needed. More durable plates enable longer runs per plate to lower your operating costs.
The Zahara Elite K74 is specially designed for use on KBA Karat 74 presses.
It is designed with compatible cassettes to fit perfectly into your existing workflow. No press adjustments needed.
- More durable plates enable longer runs per plate to lower your operating costs.
- Consistent Quality Ensures Flawless Performance.
Verico’s high-end coating technology always provides the finest screening and a sharp dot on every
substrate. Our plates deliver high resolution and reach up to 240 lines per inch. In production, we cut the plate aluminum in line. This gives each plate the same precise, smooth edge and avoids damage expensive rollers and blanket material.
With our stringent Quality Control processes, you can be confident that every plate will provide the same flawless performance.
Verico’s high-end coating technology always provides the finest screening and a sharp dot on every substrate. Our plates deliver high resolution and reach up to 300 lines per inch or FM20 in stochastic screening mode. In production, we cut the plate aluminum in line. This gives each plate the same precise, smooth edge and avoids damage to expensive rollers and blanket material.
With our stringent Quality Control processes, you can be confident that every plate will provide the same flawless performance.
Zahara plates are known for their durability; the silicone layer stays extremely stable and you get more runs from each plate.
Verico has a 125,000 square foot (12,000m2) manufacturing space in the company’s U.S.
headquarters in Enfield, Connecticut. We also have a dedicated 800-square meter warehouse in Europe to help ensure that you have as much safety stock as you need in local inventory.
• CHEMISTRY-FREE
• ENVIRONMENTALLY FRIENDLY
This innovative high-speed processor was engineered for newspaper and commercial printers with the environment in mind. Its water only technology which allows it to be recovered filtered recirculated and heated is a clean solution for prepossessing chemistry-free waterless offset that deliver always high quality results.
Eco-Kleen 100 is designed for chemistry-free waterless plates which are simply imaged and washed using clean water to provide press-ready plates Chemistry-free plate setup completes the picture of eco-friendly waterless printing allows for longer runs per plate and improves profitability.
With the use of four oscillating high-speed brushes made of a special Polyamide material, EcoKleen 100 provides the most efficient and stable washout reproduction EcoKleen 100 has robust engineering with extremely powerful motors and resilient gears. With its extremely high-pressure water pumps it ensures a safe brush humidification to avoid washout errors.
The EcoKleen 100 uses an intelligent water recirculation filter systemThe processor consumes up to 0.05 liters of recycled water per plate and is about 120-times more economical than other competing processors which use up to 6 liters of fresh water per plate. For example a newspaper Printer with 3 prepress lines and an annual plate consumption of 180000 panorama plates reduces water consumption from 1,080,00 liters to only 9,000 liters per year.
FAST, EASY AND RELIABLE CLEANING OF ZAHARA PLATES
- Designed for easy use and low maintenance
- Water-saving, environmentally-sustainable operation
- Robust engineering; sturdy steel frame; PVC tank
- Closed system with 80-liter water recycle (no need for external water connection)
- Equipped with a three brush system-Oscillating brushes with adjustable pressure and soft touch technology for highly efficient cleaning
- User-friendly digital control panel for plate count, temperature, brush and transport speed setting
- Automatic start with plate reading sensor
- Plate thickness range: 0.15mm–0.30mm
Zahara® EcoKleen offers chemistry-free solutions to help streamline plate cleaning in the industry. You can simply image, wash and then put aside press-ready plates well in advance of mounting them on press.
At Verico Technology, we understand that quality, ease of use and low maintenance are important. Verico is proud to offer the Zahara® EcoKleen 70 series, a fast, easy and reliable cleaning solution for all Zahara plates. It’s robust engineering provides a water-saving, environmental- sustainable, operation to reduce costs and provide exceptional quality. It’s extremely compact washer design is for plates with a maximum width of 680mm. Reduce your annual water consumption to nearly zero per plate.
COMPACT CTP SYSTEM FOR VERICO ZAHARA® WATERLESS PLATES
Compact size and footprint
Ideal system for imaging Verico Zahara® waterless plates
Images other 830nm thermal CTP plates
2540dpi and 5080dpi (optional) resolution
Fully automated loading
Dual top loading feature offers automated loading of two
sizes of plates
Optional internal punch system
Environmentally-friendly features
The HD Pro-W’s laser system is proven in a large number of systems on the market. Its high resolution and accuracy compliment the imaging quality of Zahara plates. Furthermore, the multiple diode system offers built-in reliability with no reduction in productivity in the event a diode needs replacement. The system automatically compensates for a weak or failed diode. Diodes are easily replaced through the simple drop-in design.
HD Pro-W provides fully automated plate loading with slip sheet removal. With two integrated trays, its dual top loading module accommodates two different plate formats in parallel for completely automatic changing. Maximum register accuracy reduces press make ready times, which also minimizes waste. The HD Pro-W boasts the lowest energy usage in its class and produces the lowest heat output.
Ready to Bring Your Product to Market?
Aydin Dogan
Verico Technology, LLC
230 Shaker Rd.
Enfield, CT 06082
The future of waterless and chemistry-free printing plates, coatings, and eco-friendly printing.
© 2022 Verico Technology, all rights reserved.
Website Powered by NorthernLogics.